Place the soundbar on its rubber feet on a stable and level surface. Hold the plug at the other end of the optical cable with the. Place the soundbar directly below (preferred) or above your TV with the grille facing into the room. If placing the soundbar on a shelf or TV stand, position the front of the soundbar as close as possible to the front edge of the shelf or stand for best sound quality. Turn the battery compartment cover left (counter-clockwise) and remove the cover. Check that the status light blinks when you press the Volume up, Volume down, or Mute/Unmute buttons on the remote. Make sure that your Bose Solo Soundbar Series II is within 30 ft (9 m) of your Bose Home Speaker or Bose Soundbar. You hear sound coming from the soundbar.

On the remote, press the Mute button A. No, there is no headphone port on the Solo Soundbar Series II. Power on this source. Plug the other end of the power cord into a live AC (mains) outlet. Unplug the power cord for at least 1 minute and reconnect. Remove the protective cap from both ends of the optical cable. Separately connect the audio cable from each sources Audio OUT (digital) panel to the soundbar. NOTE:Do not disconnect your sources video cable, such as an HDMI cable, from your TV. If the soundbar is connected to a TV output labeled VARIABLE (VAR), reduce the TV volume. If you havent already, disconnect your TV from the soundbar. Set your TV volume to 75% of maximum. b. For best sound quality, dont place the soundbar in an enclosed cabinet or diagonally in a corner. Make sure there is an AC (mains) outlet nearby. Dont place any objects on top of the soundbar. Connect the power cord to the power supply. b. Bose - Sound Bars. Set the soundbar volume using the remote. Insert the new battery flat side up, with the + symbol facing up. Connect using the Bose Music app. According to the soundbar manual, an alternate sound source can be connected using either an optical cable or 3.5mm to RCA stereo cable. Do not use the coaxial cable (not provided) and optical cable at the same time. NOTE:The port has a hinged door that swings inward when inserting the plug. NOTE:You MUST use either Option 1 or Option 2.

Blocking the ports on this side affects sound quality. Place the soundbar outside of and away from metal cabinets, other audio/video components, and direct heat sources. Refer to your TV owners guide for more information. Firmly push the plug into the port until you hear or feel a click. Does this sound bar come with optical cables please? To ensure optimal volume control from the soundbar: a. For proper support, both feet must be resting on the surface. Do NOT use a vacuum to clean the soundbar.

It is not possible to connect Bluetooth headphones either, as these are designed to receive a Bluetooth signal, rather than to transmit one to the soundbar. Insert the RCA analog cable into the Audio OUT RCA (red and white) ports on your source. Connect your source to the soundbar (see page 33). Make sure your soundbar is ready to connect: On your Bose Solo Soundbar Series II remote, press and hold the Bluetooth button l until the Bluetooth light on your Bose Solo Soundbar Series II blinks blue. Do NOT allow objects to drop into any openings. Make sure your TV speakers are on. Align the plug on one end of the cable with your TVs Optical OUT port and insert the plug carefully. Vibration can cause the soundbar to move, particularly on smooth surfaces like marble, glass, or highly polished wood. Insert the stereo plug into the soundbars dport. Yes it comes with one optical cable and is easy to set up. Insert the other end of the cable into the d port on the soundbar. Do NOT use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives. Power on the soundbar (see page 21). Copyright 2022 You dont hear sound coming from the TV speakers or soundbar. On the back of each source, locate the Audio OUT (digital) panel. If you are using a cable/satellite box or other secondary source: a. Reset the cover and turn it right (clockwise) to lock in place. All rights reserved. Check the battery to see if its installed properly or if it needs to be replaced (see page 41). Bose SOLO SOUNDBAR II | Series: SERIES II | Pages: 46 | Created on: 2020-05-27 | File type: PDF | Filename: Bose 831262-0010 QuietComfort Noise Cancelling Earbuds - Bluetooth Wir Bose 831262-0030 QuietComfort Noise Cancelling Earbuds True Wirele Bose 834402-1100 Black Surround Speakers 700, Bose 809281-1100 Black Surround Speakers (Pair), Bose 829393-1100 Triple Black Portable Home Speaker, Bose 761529-0010 Black SoundSport Wireless In-Ear Headphones. Align the plug with the soundbars OPTICAL port and insert the plug carefully. Connect a sources analog port to the soundbar, Connect a TV headphone port to the soundbar, Soundbar doesnt connect with a Bose Home Speaker or Bose Soundbar, Soundbar doesnt reconnect to a previously- connected Bose Home Speaker or Bose Soundbar, Use manuals file type: PDF. Point the remote directly at the soundbar. You can access this option from the Settings menu. Connect the power supply into the Power port on the back of the soundbar. Select the appropriate TV input. Keep the back side of the soundbar at least 0.4 in (1 cm) from any other surface. If wall mounting the soundbar, adjust the audio (see page 14). Bose SOLO SOUNDBAR II - Use Manual - Use Guide PDF. To avoid wireless interference, keep other wireless equipment 1 3 ft (0.3 0.9 m) away from the soundbar. Insert one end of a 3.5 mm stereo cable into the TV headphones port. Choose a separate audio cable for each source using either Option 1 or Option 2 (see page 36). The soundbar powers on, and you hear a tone. Do NOT allow liquids to spill onto the soundbar or into any openings.

Site is undergoing maintenance

The Light Orchestra

Maintenance mode is on

Site will be available soon. Thank you for your patience!

Lost Password